abs module
 

I just change the abs module and still getting code p0600 and p1747...nothing on the cluster works except for the gas guage and rpm the temp kind of work but goes all the way to HOT and back to normal in a few second all the dash lights are on the rear suspension is lower than the front and the trans fail prog is on.

I think P0600 is a communications fault, and P1747 I believe would be for transmission failsafe... If you replaced the ABS module you still need to get it programmed/encoded to the vehicle with the proper BMW equipment otherwise it won't work properly and will remain in a faulted state. You really need to bring it to either the dealer or a shop with the BMW GT1 and SSS/progman equipment to get it all sorted out from this point.