X5 DEPO Angel eyes?
 

Does anyone have any PDF instructions on how to install the x5 DEPO Angel eyes? Particularly the wiring. In the picture below I am assuming the left two plugs are for the high beam and the angel eyes. The I am pretty sure that that all I have to do is unplug my high beam and connect it to this one, but where do I plug the angel eyes on the DEPO to the car?

Rico.

http://www.speedstersource.com/REDCO...HP_LED_W_G.jpg

All the connection will fit the factory connections you cannot make any mistake if you look at what you are doing.
All the plugs are there on the vehicle, i just changed mine and have no issues

The Angel Eyes should be plugged to the "Park Light" (the little light about the high beam on the original headlights).

OK I guess I will need to fish around for the "park Light" I only see a connector for the turn signal, high beam and low beam, nothing else.

Then again it could just be me since my car only came with halogen lights and I am trying to convert to HID.

Rico.

the park light should be just above the high beam on the original headlights.

Here... this is where it should be. Hope this helps
Attachment 42978