Window regulator- pulley spindle
 

I have dismantled the window regulator and found the wire pulley twisted and distorted in the spindle. I see that replacement kits are available, (ie new wire pulleys, spindle) . I have removed unit from motor. Does anyone know how to remove spindle from regulator unit. many thanks

Hey daztc, , any luck finding out your problem, I have the same issue with my driver side rear window. It intermittently goes down (always goes back up). I tested the switch, took the door panel off and even took the motor apart and cleaned the brushes and still nothing. The only thing I can thing of is that the wire pulley system is somehow getting jammed?? If I just take the cover off the pulley system can I inspect the wires or is it under tension and will it it all come flying apart on me?

hi, the two pulley wires are not tension strung, one is wound around the spindle in one direction whilst the other is wound in oposite direction, however if the wires are jammed (like mine) you need to remove the spindle from the metal bar...thats the problem because the spindle is push-fitted and although it can be removed by leavering it off its impossible to push it back on...i think its a case of replacing the whole unit but without the motor,,,i've been searching e-bay etc....hope this helps

any luck, i am in the same boat, need new cable/wire/track assembly only

found one at auto haus for 131.80 AppError IS&year=2003&cid=window@window&gid=10217@Window Regulator

will report back with any other findings

seems like alot of places like thepartsbin and A1 auto have these track assemblies for about $100, i wonder if autohaus will price match

yea right , dont think that will happen, if it
does let everyone know