Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   3.0i Drivers w/ Dinan Software (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/77735-3-0i-drivers-w-dinan-software.html)

Cisc0 12-11-2010 12:06 PM

3.0i Drivers w/ Dinan Software
 
I recently went to Bay Diagnostic in Brooklyn to install Dinan engine and trans software and the technitian told me that I cannot used AFE CAI with the software because it won't support it or benefit from it. I asked what to use and his reply was the K&N performance filter with the OE air box. I still went ahead and had them install the software. Have any of you running Dinan engine and trans software on your 3.0i heard of this before??


Thanks in advance for your input.

Z3inSC 12-11-2010 04:09 PM

I have a Z3 w/ a 2.5 with the Dinan Stage 2 software plus a AFE Pro Dry S CIA. There is no issue...I think the tech was interested in you buying K&N from him...I would not worry about it.

hunds02 12-11-2010 04:20 PM

Yeah, I would have to agree with Z3inSC. They just want more money from you, and the afe CAI has better performance gains than a k&n filter.

wallyx5 12-11-2010 05:05 PM

:iagree:
Quote:

Originally Posted by hunds02 (Post 787383)
Yeah, I would have to agree with Z3inSC. They just want more money from you, and the afe CAI has better performance gains than a k&n filter.


ArtMan 12-11-2010 05:28 PM

Cold Air Intake System Stage 1 BMW X5 (E53)- 01-06 L6-3.0L 54-10691 - aFe Power

the pro dry or oiled cotton? which is better ? i would think the dry one with no oils?

Z3inSC 12-11-2010 06:33 PM

I made the choice for the Pro Dry S for less maintenance and less concern of the possiblity of over oiling the filter then having some oil get on the MAF. I've read and talked to a couple of folks that the BMW MAF is very sensative and if the oil gets on the sensor it's pretty much so toast.

Cisc0 12-11-2010 06:57 PM

Quote:

Originally Posted by Z3inSC (Post 787381)
I have a Z3 w/ a 2.5 with the Dinan Stage 2 software plus a AFE Pro Dry S CIA. There is no issue...I think the tech was interested in you buying K&N from him...I would not worry about it.


:iagree: And that's why I went ahead with the software upgrade and I'm happy with the outcome. X picks up and shifts through gears more smoothly and sporty. I have an oiled AFE and have not had any issues with the MAF, but once it's time for a cleaning, I will just replace with the dry and clean the MAF while at it.

Thanks for your input everyone.

mrbmwx5 12-13-2010 03:06 AM

Congrats ... Now get the x pipe with 4.6/4.8is mufflers and turner HP
Pulleys kit plus bavauto high performance coils ...you will be very happy .

Cisc0 12-13-2010 10:07 AM

Quote:

Originally Posted by mrbmwx5 (Post 787675)
Congrats ... Now get the x pipe with 4.6/4.8is mufflers and turner HP
Pulleys kit plus bavauto high performance coils ...you will be very happy .


Got the X-pipe, got the Turner HP pulleys, got flo-master mufflers, replace all coils (not bavauto though)... and then after I drove the bitch I got :D.

It does not turn it into a "monster 4.6/4.8" but it does make a HUGE difference.


All times are GMT -4. The time now is 08:35 AM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.