PA Soft BMW Scanner 1.4.0 help needed
Just bought the BMW scanner 1.4.0 to see if I have any fault codes for the X5 (E53).
I installed it and everything was working fine. After playing with it for quite some time with the lights on and the engine not started, I had a drain on the battery and also the battery on my laptop died. All of this screwed up my ABS module and I'm now stuck with NO ABS/DSC... and with a Coding Error for ABS. Looking inside the ABS_hw....epb file for the X5 this is what I have: ABS Coding data ( DSC5.7 6.765.430 hw:51 sw:03 ci:15 di:17 bi:3C ) 01 : A5 FF 00 00 I read the ABS coding file from the X3 (E83) and it looks like this: ABS Coding data ( DSC_E83/84,E53 3.414.642 hw:10 sw:0.24.3 ci:02 di:0021 vi:4C56 ) 3000 : 04 E2 00 00 3001 : C0 24 08 04 50 7D 82 82 21 A0 21 21 96 50 50 50 50 32 3002 : 14 06 0A 06 96 0E 14 04 04 05 19 3C 3003 : BE 94 12 06 C2 0E 33 33 3B 8A 9B D0 0D 84 0D 84 05 E4 05 E2 F7 C2 CB 2B 19 6E 6E 01 3004 : 0F 28 0D 04 01 F4 FF 88 00 00 0F 0E 0F 0A 00 53 Obviously I cannot recode with the X3 file so I'm asking for help. If anybody with a 2003 X5 4.4i (E53) can save the coding for ABS and open the file with a text editor and post the content here, or if you can send me the file I would really appreciate. Help! Help! Help! Thanks, Marius |
Anybody? Any help? Any ideas?
|
|
what was the solution for this issue
|
Quote:
bece13 hasn't been online since 2012. You may be waiting a while... |
All times are GMT -4. The time now is 09:27 AM. |
vBulletin, Copyright 2024, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.