Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   slight vibration around 85-90 with slight throttle input (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/79566-slight-vibration-around-85-90-slight-throttle-input.html)

nom3rcy 02-23-2011 02:00 PM

slight vibration around 85-90 with slight throttle input
 
I am experiencing a slight vibration when maintaining a steady speed in the 85-90mph range. When I apply the throttle enough to keep up the pace, it seems like something in the drivetrain is out of spec.

Is there a guibo or some sort of bearing that could be going bad?

I'm hoping this is not an indicator of a larger issue.

nom3rcy 02-25-2011 05:54 PM

anyone?

petener999 02-25-2011 05:59 PM

It might be your flex disc.

toohotdoc 02-25-2011 09:30 PM

Whats a flex disc? Cost of repair?

petener999 02-25-2011 09:45 PM

1 Attachment(s)
Quote:

Originally Posted by toohotdoc (Post 807634)
Whats a flex disc? Cost of repair?

Is a rubber piece between your drive shaft and tranny.

joeboch348 02-26-2011 02:26 PM

speed limit is 90 in MN? lol

toohotdoc 02-27-2011 10:37 PM

Quote:

Originally Posted by petener999 (Post 807638)
Is a rubber piece between your drive shaft and tranny.

Would you happen to know the cost of the part and cost to install? I hear that this vibration Im having can also be the torque converter but I rather try a cheaper route first if possible.>Thanks

Greg 03-03-2011 05:15 PM

follow this link to partsgeek.com. They have them there for around $75 .

01 2001 BMW X5 Drive Shaft Flex Joint - Driveshaft & Axle - Febi, Lemfoerder, Beck Arnley, Rear, Front - PartsGeek

nom3rcy 03-03-2011 05:56 PM

Quote:

Originally Posted by joeboch348 (Post 807772)
speed limit is 90 in MN? lol

Private roadways etc ;)

ArtMan 03-04-2011 12:51 PM

Hmm...ive been battling the vibration issue for a year or two now. First i bought some kit off ebay that had cheap ass control arm bushings...so i bought oem bushings for the lower control arms and tried to press them in the cheap arms but the holes in the arms were way to big so i had my oem arms still but with 130K miles on them i was hesitent on using them cuz of the ball joints. they were very loose. So i pressed new oem bushings into them and overall no more shimmy on bumps etc. but at 80mph I get a front end vibration the steering wheel doesnt move or anything i just feel a vibration. The tires are new and balanced. I wanna blame the rotors but it has no impact on the steering and i dont feel anything through the peddle....but there is a definite vibration .....anyone have a clue? im not sure if a flex disc will cause this.....


All times are GMT -4. The time now is 07:53 PM.

vBulletin, Copyright 2025, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.