gt1, dis, reset adaptation values instruction with pics
 

So turn on laptop, find your car, it should auto detect

Click Control Module Functions
https://lh3.googleusercontent.com/-X...0/IMG_2597.jpg

select transmission control gs1904, followed by reset/relearn values/ followed by reset all adaptation values

https://lh5.googleusercontent.com/-0...0/IMG_2598.jpg

click activate
https://lh3.googleusercontent.com/-j...0/IMG_2599.jpg

you can now go back one stop, click read adaptation values, select any one of the adaptations, and it should be all zero.
https://lh4.googleusercontent.com/-6...0/IMG_2600.jpg

https://lh4.googleusercontent.com/-g...0/IMG_2601.jpg

Thanks Xoutpost for your help, and especially TwinsPoppa for his help and gt1.

Wow very good I'll be trying that one in the morning !

Glad it's of use. Enjoy.

Can u find out if there has been any bad gear changes , when I paid BMW to do this reset they said theres been a number of bad gear changes ?
Many thanks

No I didn't have any gear change codes.

adaptation values
 

wow!! i just did this and now I have a new gearbox.. no more drastic kicks from 2nd to 1st when decelerating, nor in 4th while accelerating, all smooth... by the way i have changed the oil and filter after what i started receiving failsafe error... but after this reset... ALL PERFECT... thanks man!
i think i will do this regularly at least once a year!

I had my adaptations reset after changing the transfer case fluid and my transmission definitely shifted smoother as well (and still does hundreds of miles later) :thumbup:

My INPA will do the same job? I'm always confused with INPA, GT1 and DIS......:dunno:

Not that I know of. This seems to really only work with DIS.

Yes, INPA will and it's easier too. I just did this yesterday. Just selection transmission->gearbox control module gs19. You'll see the option to reset the adaptation values.

So this works? I have that slip 2nd to 1st. Happens more prominently when cold.

^have you checked your trans mission fluid? when its cold like -20c your transmission fluid will shrink and when warm expands . if that makes sense.

Just changed. Also verified a week later the fluid was at the correct level. I had the downshift slip before the change.

Where can you get this software??

I really want to know, too.

Well if you ordered your romanian obd cable, it should have come with the software. Otherwise, I don't know here you can download it. I bet if you go to BMW coding.com, you might find a download link.

Quick search on eBay and you find versions like these that have a cable

BMW GT1 OBD Diagnostic Interface K Dcan Using BMW Dis V57 SSS V32 | eBay

Hello
Is it possible to read the adaptation values using INPA as well ?
I managed to install DIS, but it is in some foreign language. I am kind of stuck after selecting the 192.168.68.1 IP . Dunno which button to press next :)
DIS is able to communicate to the car directly or it needs a working INPA connection before starting DIS?
Is there a way to change the language to English ? I understand it's a bunch of stupid questions, but I appreciate your patience. Thanks a lot!

Its hard to tell where you messed up. Even though I need to fix DIS, I have been managing with INPA.

Yea, I am pretty sure you can read the values with INPA. Click around in it.

I got an English version of DIS with instructions. got it working and I was able to read the adaptation values.
Thanks a lot SlickGT1