LED Tails/Capacitor Question for 2004+ E53
 

I'm looking to go forward with a set of Solor LED tails for my 2004 E53.

Many mention needing a capacitor set to prevent the 'flickering' that results from the Adaptive Braking in the 2004+ models. The vendor "Light Werkz" is also mentioned as a good source.

The only thing I can find on their web site regarding capacitors of any kind is the following. It does not mention tail lights nor BMW nor the E53. Does anyone know if this is the right thing? Other recommendations? Would hate to get all this stuff and not be able to use it.

HID Projector Headlight Retrofit for Subaru, Honda, BMW, Scion and More | LightWerkz.net

Any info appreciated! TIA!
Rodie
--
2004 X5 4.4i
2003 M3

Just Email Cesar @ Lightwerkz using the contact form on their website I believe.


He is quick to get back to you and quick to ship, and will send you a paypal invoice for 25 bucks for the capacitors, plug them in and you're good!


-J

DIY version is here, if you are interested in that route:

http://www.xoutpost.com/bmw-sav-foru...nics-shop.html

The Lightwerkz fix is the right thing. Ten minutes or less of your non-techy time and headache goes away. I did this just recently on my '03. If you can operate a pair of pliers and know the difference between green and black, you're good to go.

Thumbs up on service, communication and quality.

Def email lightwerkz i talked to the guy and he's real helpful and quick to respond with emails. Its too bad he sold his white x5 but if u email him he'll still help u out!

I'm interested in doing this to my 2004 x5 freaking tired of the "check rear light" message. Where can I get a set of these smoked tails that would give me no errors? Thanks in advance. I met Caesar as well. Very nice guy

ebay 00-06 BMW E53 X5 3.0i 4.4i 4.6is 4.8is JDM RED SMOKED 4PCS LED TAIL LIGHTS LAMPS | eBay

No, your problem is intermitent contact or old bulb.

The "flickers" people are talking here is really the LCM sending pulses to check for burn out bulb, but aftermarket LED will flick while regular incadescent won;t that's where capacitor will smooth out the pules/flickers.

I know that. I was just stating I'm tired of that error message with oem tails. If I go aftermarket I shouldn't have this problem. I do understand the aftermarket flicker but with the capacitor they should be fine. I just don't want any error message. Can anyone confirm that ebay set doesn't generated error codes once I mount them with capacitors?

Built in Capacitiors?
 

The seller sent me this -- so I didn't buy anything extra. Hope he is correct!

-- SNIP

Dear ,

there tail lights should have built-in resistors that should not cause the lights to flicker

Best Regards,

Brian Hua

:::a0KA0000004yLAbMAM:::
- x3racing