E53 4.4i with engine light on
 

I need some advice as to where to start looking on this, some searches have turned up few ideas, so here we go I guess...

Here is what I am getting from INPA.

Any suggesting or experience with the same fault gratefully received.

Error registration 3 : 0x001B: LR-Adaption multipl. Area1 (Bank2)<<<<!!!
Error accurances: 6
Logistic counter : 23

Error accure 1st time at:
Engine speed
 2320.00 /min
relative air charged (rl) 37.50 %
Intake air temperature 19.50 Grd C
gas level77.00 l

Error accure 2nd time at:
Engine speed 2280.00 /min
relative air charged (rl) 48.00 %
Intake air temperature 19.50 Grd C
gas level 77.00 l

Error accure last time at::
Engine speed
 1240.00 /min
relative air charged (rl) 21.00 %
Intake air temperature 36.75 Grd C
gas level 72.00 l

--

--

--

Limit at rich range reached current,
--

--
Limit at rich range reached Initial,
--
--
--
--

CARB debounce

SCATT-active

--

--

Fault sporadic


anyone?

What is the Code that is being pulled? That seems to be the log of the error.

Is this an M62 or N62 4.4L?

Been almost 3 months, bet he got it running and forgot all about this.

Don't say you'r grateful of receiving suggestions/help and not reply when members try to assist you in troubleshooting, you send mixed signals!

check engine light on means some fault code stored in your car,
you can get a code scanner tool clear it.

Oh my. That sure does sound like a good idea. But the guy obviously has something better that your crap you keep pushing around here, he just didn't know how to use it.
And that was 3 months ago.
DO YOU READ THE POSTS THAT YOU ARE SPAMMING?

Sent from my SGH-i917 using Board Express

Hate it when this happens. Dead-End thread.