Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   E53 3.0 Automatic Clutch fan nut seized (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/90472-e53-3-0-automatic-clutch-fan-nut-seized.html)

romeokc10 12-14-2012 11:14 PM

Quote:

Originally Posted by E46er (Post 911620)
I had no luck with this stupid nut. This nut is seized for some reason either the last tech who worked on it overtorque the damn thing or it wasn't removed recently ie a couple years. I hate that stupid plastic pulley that the clutch fan sits on that thing can go any minute and I can't change it out cause of the clutch fan. I have brand new pulleys to install and that clutch fan is not budging, I hate. To pay someone at a shop to do this because I've done this job at least 5 or 6 times already. But I have no choice I tried whacking the thing after spraying freeze off and PB blaster and nothing. :dunno:


I replaced my water pump and all belts on my 4.6is back in October, replaced the plastic pulley with an aluminum pulley for peace of mind. The nut shouldn't take that much to get it off, and it doesn't take much to tighten it, it will self tighten due to it being reverse threaded. You can buy the metal bar that holds the pulley in place on Ebay.

jgold47 12-14-2012 11:38 PM

Can you modify the e53 with An electric fan like on an e46?

brokenbmx06 12-15-2012 12:15 AM

Quote:

Originally Posted by jgold47 (Post 911825)
Can you modify the e53 with An electric fan like on an e46?

Good question. PArt of my motivation for buying a manual was for the electric fan like on my e46. That was unfortunately not the case.

E46er 12-15-2012 01:02 AM

1 Attachment(s)
Quote:

Originally Posted by romeokc10 (Post 911823)
I replaced my water pump and all belts on my 4.6is back in October, replaced the plastic pulley with an aluminum pulley for peace of mind. The nut shouldn't take that much to get it off, and it doesn't take much to tighten it, it will self tighten due to it being reverse threaded. You can buy the metal bar that holds the pulley in place on Ebay.



You mean this...........yup I tried that one already

romeokc10 12-15-2012 01:14 AM

Yep, that's the one, it must really be on there. I see you're in NYC, if the vehicle has spent it's entire life in the north east it could be corrosion from all the salt they put on the roads in the winter.

SlickGT1 12-15-2012 01:20 AM

Get the bar and wrench close to each other. So close that you can grab both with one hand. Use two hands though, and squeeze the two together. Or put extensions on the bar and wrench.

RDAvena 12-17-2012 04:04 PM

Quote:

Originally Posted by jgold47 (Post 911825)
Can you modify the e53 with An electric fan like on an e46?

Yep and it is extremely easy. I used a electric fan from a 95 960 Volvo, the cooling fan relay from the same, and a 40 amp circuit breaker. Plenty of write-ups with pics on the web. This was installed on a 2002 X5 3.0l.


All times are GMT -4. The time now is 07:08 PM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.