Xoutpost.com
Page 2 of 2 1 2
Show 200 post(s) from this thread on one page

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   M54 starter, diy, video, writeup, info (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/91588-m54-starter-diy-video-writeup-info.html)

ake53 03-03-2013 11:40 PM
Quote:
Originally Posted by upallnight (Post 925103)
Looks like they need to remove the intake manifold in order to remove the starter. Should replace the intake manifold gasket at this time, if you haven't done a CCV service now will be a good time to do that also, as well as replace the rubber intake boot.

https://www.youtube.com/watch?v=IcIDpQnFdyE
FML

my intake manifold gasket was just replaced. again?
CCV/PCV done.
rubber intake boot also done...

ake53 03-04-2013 03:32 PM
in the end it was the starter stud. so electrical connection.... $110
better than paying for a starter. however now i know how to get to the starter and the ews system and i have another key...


All times are GMT -4. The time now is 06:40 AM.
Page 2 of 2 1 2
Show 200 post(s) from this thread on one page

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.