Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   Mod king is back (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/94325-mod-king-back.html)

mrbmwx5 10-04-2013 06:40 PM

Mod king is back
 
.

Ricky Bobby 10-04-2013 07:10 PM

awesome output. Why no diffuser over the LED rings though? Whats the diameter of those rings (I have the same housings)

MINIz guy 10-05-2013 11:41 AM

Need the eBay source for these too!

Been running around St. Louis with my blacked out projectors and one of my CCFL AE's are broken. I need to bake them open again to fix it so I might as well upgrade to LEDs.

Edit: Think I've found it.

The X5 uses 160mm outer rings and 130mm inner rings.

2X 130mm BMW Angel Eyes 42 SMD LED Ring Car Light White 416 | eBay

2X 160mm BMW Angel Eyes 45 SMD LED Ring Car Light White 490 | eBay

Under $30 for the whole projected assuming you just take extra wire and connect it to an ignition source.

Ricky Bobby 10-05-2013 03:52 PM

Quote:

Originally Posted by MINIz guy (Post 958436)
Need the eBay source for these too!

Been running around St. Louis with my blacked out projectors and one of my CCFL AE's are broken. I need to bake them open again to fix it so I might as well upgrade to LEDs.

Edit: Think I've found it.

The X5 uses 160mm outer rings and 130mm inner rings.

2X 130mm BMW Angel Eyes 42 SMD LED Ring Car Light White 416 | eBay

2X 160mm BMW Angel Eyes 45 SMD LED Ring Car Light White 490 | eBay

Under $30 for the whole projected assuming you just take extra wire and connect it to an ignition source.


Hold up on those measurements, those sizes are for OE lights. Not sure if the diameter is the same for the aftermarket housings mrbmwx5 and you have. I will have a set of these baked open over the weekend (I'm doing a retrofit for a member on these same lights) so I will measure the diameters and get back to you with the proper sizes!

These are the ones I would recommend using in your housings (look more OE)

6000K Xenon White Universal Fit Halo Angel Eye LED Projector Ring Version 2 V2 | eBay

Just need the proper sizes and you should be good to replace the CCFL!

haumana 10-05-2013 04:51 PM

dumb question ...
 
do all alterations to the halo light require prying open the plastic lens housing? what year did the halo's become the DRL?

Ricky Bobby 10-05-2013 05:25 PM

To miniz guy, the sizes for the rings are 145mm for high beam and 123.8 (I'm sure 125 is fine) for low beams on those aftermarket headlights. I just measured, but may pick up a caliper to take precise to the mm measurements.

I used a tape measure on the outer diameter of both at the widest point, and converted inches to mm.

High beam - 5 3/4
Low beam - 4 7/8

tmv 10-05-2013 10:10 PM

Looking good Tom
Quote:

Originally Posted by haumana (Post 958444)
do all alterations to the halo light require prying open the plastic lens housing? what year did the halo's become the DRL?

Starting with the E70/E71

MINIz guy 10-06-2013 06:29 PM

Ok, so you're supposed to buy 140mm and 120mm rings?

I don't think they make 125mm rings.

Ricky Bobby 10-06-2013 07:18 PM

The link I posted from eBay has 125 and 145 mm rings availAble! Just search for "led angel eye rings v2" the seller is elitemailers.

They should be 41 per pair. Hope that helps bro!

And I double checked the measurement today, its def 145 for the high beam and 123 for low, so 125 is close enough

diyanich 10-06-2013 08:07 PM

There's a link in #9 and those are 160 and 128 mm

http://www.xoutpost.com/bmw-sav-foru...re-bright.html


All times are GMT -4. The time now is 11:26 AM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.