Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   Angel Eyes on a pre-facelift E53 (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/94725-angel-eyes-pre-facelift-e53.html)

greymda 11-11-2013 03:51 PM

Angel Eyes on a pre-facelift E53
 
1 Attachment(s)
hi,

hope you'll help me out.
i won a pre-facelift (2001) E53. it's great car but i really miss the Angel Eyes on it... well it's a BMW and w/o eyes it's kinda not cool.

so i've replaced my original halogen headlights with Depo-branded ones.
so far it's okay, BUT where i do connect the AE?..

on a local forum someone said he connected to the parking lights (the amber ones on our headlights) and it's working nicely.

but afaik these light are also turn lights, so i think his Angel Eyes are blinking too, when turning?

or am i wrong?

thanks

p.s. this is what i've got so far:

Ricky Bobby 11-11-2013 03:53 PM

Did the Depo's come with any additional wiring or instructions? MD, are you from Moldova? Not sure how the European X's are wired but there should be a parking light plug that you can tap into from the car.

greymda 11-11-2013 03:57 PM

no wiring, no instructions...
they have 4 connectors - low beam, hi beam, turn signal/parking light and angel eyes.
first 3 i've connected w/o any problem. but where should i connect the angel eyes? if i slice into parking/turn light - will the eyes blink too, when i press the turn handle?)

yes, i'm from Moldova, but it's an American version of X5.

mrbmwx5 11-11-2013 04:03 PM

Tap it to ignition or ECU box

greymda 11-11-2013 04:06 PM

so they DO blink with the blinkers when turning? :)

tmv 11-11-2013 04:11 PM

Quote:

Originally Posted by mrbmwx5 (Post 963286)
Tap it to ignition or ECU box

This. Find the ignition-on wire in the ECU and tap in the red AEs power-wire. Ground the black wire to any chassis ground point.

bcredliner 11-11-2013 04:19 PM

The following thread may be helpful: http://www.xoutpost.com/bmw-sav-foru...-all-time.html

UCrewX5 11-11-2013 04:28 PM

This is how I did mine - http://www.xoutpost.com/articles/x5/...ngel-eyes.html

Gives a total factory appearance.

Ricky Bobby 11-11-2013 04:34 PM

Quote:

Originally Posted by UCrewX5 (Post 963296)
This is how I did mine - http://www.xoutpost.com/articles/x5/...ngel-eyes.html

Gives a total factory appearance.

Very nice, although my rear fogs are in use right now so it wouldn't work for me.

However, theorizing the pinout of the factory switch, is there a parking light AND a turn signal pin? I prefer my AE's to operate as parking lights so I would use a parking light trigger to tap the switched power.

I guess I could always check what pins are energized with +12v when the light switch is in position 1, and if there are 2 pins energized i'm assuming one's voltage will change once the blinkers are activated

greymda 11-11-2013 04:38 PM

i'm not really fond of turning my AE into DRL, so i want to have them on with smth

easiest is tapping them to (front) fog lights and have them on using the button.

in my country it is allowed using front fog lights as DRLs...


All times are GMT -4. The time now is 05:20 AM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.