Xoutpost.com
Page 4 of 4 123 4
Show 200 post(s) from this thread on one page

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   Expansion tank bleeder screw (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/95882-expansion-tank-bleeder-screw.html)

SlickGT1 02-12-2014 05:50 PM
I was thinking that too. But I have never found the needle one to be accurate on the removal. I was hoping there was an accurate method to this.

bcredliner 02-13-2014 01:49 PM
Quote:
Originally Posted by giodog2000 (Post 980131)
I have a few Torque Wrench and one of them is the one with a needle and you can go both ways but usually measuring the inverted torque isn't accurate to the initial torque.
Correct, inverted torque is useless. Use the torque wrench as if you are tightening the existing bolt and read the needle when the bolt starts to turn.


All times are GMT -4. The time now is 12:49 AM.
Page 4 of 4 123 4
Show 200 post(s) from this thread on one page

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.