![]() |
What controls shifting points ?
SES engine light just came one. Car runs fine, has been a couple times where it felt a bit sluggish. There has been at 4X in the last 2 weeks where the it would not upshift a gear when it needed to. No transmission *errors* on the the dash.
I've yet to bring it to the shop to have the codes properly read. |
Could be cause of the code depending what it is.
Another thing to try is turn key to before-start position and hold gas all the way down for 30 sec preforms a trans reset, as it adapts to how its driven/"used to". If code isnt part of it nor trans reset fixes, change fluid/filter/pan gasket. |
Quote:
What occurs doing the "mythic" tranny reset...vs...the data ATC is interpreting:
Doing the aformentioned "trick"...after the engine is turned off...the vehicle returns to normal XE/E/S mode based on the next driver's style of driving...the driver's influence is NEVER stored in the TCM (transmission control module)...each new driver gets a brand new adaptation...thus the car responds specifically to whomever is driving the vehicle...without a long term "learning" cycle. :) Or, if the driver is not really an aggressive driver, the shift mode will return to what the driver actually is doing (normal or granny-toe mode) within minutes of being a non aggressive driver. This is how it works, ATC will select one of 3 driving modes EVERY TIME the car is started (see driver influence & kick fast features below):
|
Quote:
Do they expect that we have the gift to know what is wrong?? If I have the gift to peer into the future I would be looking at the next Powerball numbers instead of why your BM Trouble U is having problem. :nanana: |
| All times are GMT -4. The time now is 06:47 AM. |
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.