removing hazard/central lock control
 

Hey guys, I realized I have a problem with the center lock and light hazard manual both not working. I don't think there's a common fuse for hazards and locking. According to my research it's kind of a common problem in the bmws for that switch to loosen up from underneath. Has anybody gone through this? I ready it's only about a 20 min job and some electrical tape. I just need a guide on removing that thing without too much damage.

Never mind just pried off easily the black shifter housing and pushing that console up. It's was Broken, piece of tape and done.

Pull off the shifter plastic cover. pull up on the Hazard/loch switch, should pop right out