OBD II not recognized? Solved
 

Hi folks.
I have a Peake scanner (for quick scans) and the GT1 & INPA laptop, both scanners working flawlessly on my e53 & e39, as well as on some of my friends BMW's, different models.
the problem I'm having, they don't work on my 2006 e46 - 325ci standard with ZHP trim.
INPA/GT1 do not recognize the car at all, and Peake throws some mystery "codes" (if you want to call them like that), without any meaning - they do NOT exist in the Peake tables.
Not sure what the issue is. Can anyone point me in the right direction?

I forgot to mention: My friend's GT1 / INPA also doesn't work on this e46 (Fmugur) - his laptop is different than mine, but works also with my other vehicles, just like the other scanners I have.

Perhaps you are using a Can Bus reader when the car has a K-bus system.

OK, I fixed the issue. I checked the fuses, and they were good (2 fuses). Probably the contact was bad, because after I put them back, the GT1 worked suddenly. I posted the resolution, because this might happen to someone else.

Doru,
Thankyou for posting the resolution. You are obviously aware of how frustrating the lack of that info can be :)

Cheers mate.