Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   02 E53 coolant leak back of M62 eng (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/99950-02-e53-coolant-leak-back-m62-eng.html)

masangya E53 02-27-2015 03:59 PM

02 E53 coolant leak back of M62 eng
 
Hi,
I have a E53 w/M62 Eng .. 127 k miles. I noticed a coolant leakbottom of trans bell housing . last year I repl the valley pan, o rings coolant pipes. Is there any were else were coolant can be leaking from?

upallnight 02-27-2015 04:01 PM

Did you also replaced any of the coolant hoses in the back of the engine?

masangya E53 02-27-2015 04:09 PM

I ck the hoses @ the RR.. They are all OK . even the pipe that connects to heads are OK.

masangya E53 02-27-2015 07:07 PM

L@@king @ some images on the net back of the M62 eng.. Theres a plate odd shape along w/ gasket under plate. In order to get to that plate (back of eng.), the trans has to drop down .

itscoo2pyopants 03-03-2015 05:28 PM

Quote:

Originally Posted by masangya E53 (Post 1028958)
L@@king @ some images on the net back of the M62 eng.. Theres a plate odd shape along w/ gasket under plate. In order to get to that plate (back of eng.), the trans has to drop down .

werd. ive read about this too.

upallnight 03-03-2015 05:54 PM

One last twist: on the the M62 V8 Engine from BMW there is a coolant plate on the back of the engine that is only accessible with the flywheel removed. This plate likes to leak coolant:

http://integrityfirstauto.com/2014/w...%20Leaking.jpg

Time to get some Prestone stop leaks. LOL

masangya E53 03-03-2015 06:06 PM

mite aswell change out the rr main seal while im in there. wish I had a elec lift. would make life easier.

itscoo2pyopants 03-03-2015 06:11 PM

Quote:

Originally Posted by upallnight (Post 1029348)
One last twist: on the the M62 V8 Engine from BMW there is a coolant plate on the back of the engine that is only accessible with the flywheel removed. This plate likes to leak coolant:
Time to get some Prestone stop leaks. LOL

what a headache:banghead:

bcredliner 03-03-2015 07:23 PM

I would check and recheck and recheck all other potential leak points even those I had worked on as far more likely to be the cause.

masangya E53 03-03-2015 08:21 PM

Ya I was thinking checking the valley pan & coolant pipes again.

upallnight 03-03-2015 08:43 PM

Quote:

Originally Posted by masangya E53 (Post 1029351)
mite aswell change out the rr main seal while im in there. wish I had a elec lift. would make life easier.

That's a slippery slope, "While I'm in there". Since you are dropping the trans you might want to do the axles, maybe the transfer case, maybe the guibo, and depending on the mileage perhaps a rebuild of the trans.

David.X5 03-03-2015 10:23 PM

Seems like it's worth confirming the need before starting all that work.

a small inspection camera could be fit up there to take a look
Or pull the starter and check with a mirror.

masangya E53 03-04-2015 12:38 AM

ill borrow a friends borescope & l@@k through the bottom holes of bell housing. also double ck the valley pan & coolant pipe o-rings.


All times are GMT -4. The time now is 12:16 PM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.