Help With Coding Error
 

Sup guys,

Can someone give me a hand, I'm getting the following error;

http://i48.photobucket.com/albums/f2...psrhvxhewg.jpg

http://i48.photobucket.com/albums/f2...ps3e1mneq4.jpg

Please note, I recently updated the datens for my E90 & E70 to vers. 55.4 by utilizing the following instructions.

To update the daten files, copy the files from SP-daten-E##\daten to the C:\NCSEXPER\DATEN\E## (where E## is whatever chassis you're updating). You will also want to copy the files from SP-daten-E##\SGDAT to C:\NCSEXPER\SGDAT (they're not separated into different chassis in NCS Expert, so you just want to copy and paste everything to that directory. Overwrite everything it asks about). The last step to fully updating the install is copying the files from SP-daten-E##\ECU to C:\EDIABAS\ECU.

Any help would be greatly appreciated.

Thanks in advance

Either power to the module is flaky (weak battery?), or your com port settings for your cable are wrong.

The com port settings should be correct I was able to previously code my E90. However, just to confirm what should the settings be?