Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E70) Forum (https://xoutpost.com/bmw-sav-forums/x5-e70-forum/)
-   -   leaking gasket under oil cap (https://xoutpost.com/bmw-sav-forums/x5-e70-forum/106386-leaking-gasket-under-oil-cap.html)

rh71 06-05-2017 09:11 AM

leaking gasket under oil cap
 
I had a shop do my valve cover gasket due to a leak almost a year ago and they supposedly cleaned up the mess. But I was under the engine cover to get at the sparkplugs and noticed the oil cap area seemingly leaking oil. There's a flap/gasket under the cap and I'm not sure if it's supposed to be moving about like in the video. I used degreaser to clean it up and only time will tell if this is left-over or an active leak / somewhat acceptably normal?

https://youtu.be/NGxrB6qi9so

Orthotist 06-07-2017 07:51 AM

If it's higher mileage, then I would just replace it. Cheap piece of mind. I had to do that on my e46 m3 after 100,000.

rh71 06-07-2017 04:33 PM

Thanks, but it's only 52k mi at the moment. What part am I replacing though? It's not the valve cover gasket (already done).

garagelogician 06-07-2017 05:09 PM

Isn't that just a trim piece for the engine cover? You might try replacing the cap, looks like a little bit of oil vapor is just making its way out from the crankcase pressure. I'm not familiar with these engines, do they have a crankcase breather? If so, might want to verify it is functioning normally.

Rbmn9529 06-07-2017 09:42 PM

ECSTuning $14.95

Orthotist 06-08-2017 10:27 AM

Sorry, I was talking about the oil cap. They come with new gaskets installed.

Deftronix 06-08-2017 10:35 PM

Replaced the filler gasket in mine around 70k because the rubber cracked all the way around. Seems that the edge of the oil cap cutout on the engine cover sits on top of the gasket cutting into it over time.

X5d Part # 11127801695
X53.0si Part # 11127565165

RDAvena 06-09-2017 11:30 AM

You want to replace the profile gasket: 111 278 06 507.
Seals the oil filler tube to the valve cover.

Deftronix 06-09-2017 12:57 PM

Quote:

Originally Posted by RDAvena (Post 1110739)
You want to replace the profile gasket: 111 278 06 507.
Seals the oil filler tube to the valve cover.

I gave proper part numbers above. :stickpoke. That part is for the diesel which op does not have

RDAvena 06-09-2017 01:28 PM

Quote:

Originally Posted by Deftronix (Post 1110745)
I gave proper part numbers above. :stickpoke. That part is for the diesel which op does not have

:banghead: FUUUUUUUUU

Sorry. Friday morning fog.


All times are GMT -4. The time now is 03:48 PM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.