Or easier way maybe is to put all the good stuff on the bad housing. And connect to the good side. This should eliminate the assembly whether it's bad or good.

Sent from my SM-G955F using Tapatalk

Ok thanks. I played alittle last night with the little white connector into the ballast and the housing plug. There wasn’t any discrepancies so.. yea


Sent from my iPhone using Tapatalk

I guess things do get interesting. Maybe before starting the wiring hunt. It's worth to check the fuse. I'm not familiar with headlamp fuse at the moment. Whether they have separate fuses for each side or not. But definitely worth to check first.

Sent from my SM-G955F using Tapatalk

Oh yea. That’s a good idea. Can anyone point me in the right direction of the headlight fuses? I have the headlight lenses off because i got new ones and I’m ready to put them all together but I have a feeling it’s way easier to diagnose without the lense so I can get to both sides.


Sent from my iPhone using Tapatalk

One would be under the glove box and the other one on the back/boot/trunk. Opposite to the first aid kit.

Sent from my SM-G955F using Tapatalk

Ok I’ll have a look after work! Thank you Mkurn


Sent from my iPhone using Tapatalk

Hi guys, does anyone have a wiring diagram for the hid headlights?


Sent from my iPhone using Tapatalk

Would anyone be kind enough to post a picture of both fuse boxes so I can compare.


Sent from my iPhone using Tapatalk

bump

Check out this website, they might have what you are looking for.

https://www.newtis.info/tisv2/a/en/

Ive had a similar experience. One side did not work, even with a "new" ballast. Turns out it was a simple mistake on my end, i forgot to plug everything back in.