Installing new injectors, code with what software?
 

I have a 2011 X5 with the N55. Im going to be replacing all of my injectors and wanted to know what program I could use to enter in the new adjustment values.

I installed INPA only to realize that I will not be able to do it with INPA. I was told I could do it with BMW DIS, but it requires so much physical memory that i would probably have to but another laptop. Looking for alternatives.

Bump, anyone?

Some have done it with tool32. Search for tool32 coding injectors n55, hopefully you find the thread

Rheingold?
See this.

I did mine with INPA. It's a little buried in the menu (and in german - I had phone in one hand with google translate). The entry format is a little cryptic but they give you an example to go by.

There are youtube videos on doing this with ISTA

Thanks for the replies. I do have tool32 already, so Ill have to check that option. Downloading ISTA would be a good idea as well.

I also found out that a tool made by Foxwell could code injectors. Model is NT510. Theres a similar one sold by ECS Tuning branded Schwaben. If someone wants to avoid dealing with the cable, INPA etc that seems to be a good route.

Foxwell NT510 Scanner with Free Car Brand Software +OBD

I did it with INPA on my 335. Was pretty easy.

What i found was that the E90 335 with N55, and E70 with N55 were not options in the INPA menu. I beleive the F30 and F10 showed up to code the N55.