E70 comfort seats coding with ncs
 

Hi.
I'm looking for some help. I had sport electric and heated front seats and changed them to comfort ones.
Control panel doesn't work but you can move seats from ista/inpa. I need to recode them, any advise would be appreciated.
Thanks

What year is your E70? It sounds like you went from base seats to comfort seats. I just did the same with my driver seat last night on a 2007. None of my functions work at all, but the seat does have power, as it did move around a bit when I plugged it in. I also have an error coming up on dash at startup saying that it can't detect seat position.

I've been doing some research, assuming I just needed to code the comfort seat option in. But it is seeming like with the base seats, we are missing a power wire in the harness that plugs into the seat to power other functions than just the base seat functions.

Still preliminary research going on. But from what I read their should be pinouts with pictures shown in ISTA for each seat option. If I figure out what is needed I will reply back here with what I did. I'm sure it still requires coding the options as well.

sport to comfort change.
 

you can change the seats by removing $481 and adding $458 in the fa file.
All option can be found in NCEXPER>DATEN>E70AT.OOO file by renaming the file to E70AT.txt and then you see all available options..