Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E70) Forum (https://xoutpost.com/bmw-sav-forums/x5-e70-forum/)
-   -   Modules not responding after ECU tune (https://xoutpost.com/bmw-sav-forums/x5-e70-forum/113762-modules-not-responding-after-ecu-tune.html)

DocFaraday 10-07-2021 11:42 AM

Modules not responding after ECU tune
 
Hi all!

Final edit: Figured it out! Kept working on other stuff and had issues coding the injectors through Tool32. Googled the error, found out Windows had reset my COM port latency to 16 (instead of 1). It allows you to connect through all the tools but it causes bad behaviors like this.

EDIT: There is no check engine light when running and it drives, shifts, and parks without any apparent issue.

The Good: Just got my ECU installed with a JR Tune and the X5 cranks and runs after a new valve cover gasket, 6 new injectors, new intake gaskets, swirl flap delete, DPF/SCR/EGR delete, new fuel filter, fluidampr crank pulley, alternator clutch pulley, new belts, new water pump/thermostat, and race pipe.

The Bad: the EKPS - Fuel Pump Control Modules and the VTG - Transfer Box modules are intermittently not responding (mostly not), the SMBF/SMFA -driver/passenger seat modules are not responding, and the CBX-ECALL is not responding.

They worked before maintenance and I don't want to chase down individual problems if there could be a common cause.

Any sage advice appreciated!

ard 10-10-2021 01:23 PM

Well, glad we could help!

:)

crystalworks 10-10-2021 10:03 PM

Thanks for the update. Could help someone with comm errors in the future.


All times are GMT -4. The time now is 12:31 PM.

vBulletin, Copyright 2024, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.