| rpm2002 |
02-16-2007 10:14 PM |
Steering wheel lack of memory
Quote:
Originally Posted by sapaman
I have the exact same issue with our new X5. Since delivery the steering wheel memory has not functioned properly - the wheel actually moves down instead of up when exiting the vehicle, and does not move back to the position stored in memory when entering.
I also have comfort access and usually don't put the key in the ignition. I just tried it now and turned the car on and off, but it did not correct the problem. Was there anything else that you did to fix this issue? Thx!
|
:dunno:The only thing that I can think of is that you need to perform your settings with the ignition on. I would go through the whole routine of inserting the key, setting your seat, wheel, mirror pos etc., store it in seat memory #1 or #2 (which I understand is independant of the last position setting that the vehicle will return to) put the car in drive, turn it off, get out of he car, lock it and then go unlock the vehicle to see if it acts the way it supposed to. The salesman himself wasn't sure how he "fixed it" . He made a reference to it being perhaps "glitchy".
My wife has been primarily driving the 5 so I can't tell you yet if it's been acting up--its only been a day since it was "fixed".This holiday weekend I'll be taking it on the 1st extended trip (albeit a short one-about 100 miles one-way) to Palm Springs. Geez, the 1st time in a while that I'm actually looking forward to driving; if you live in L.A. you'll know what I'm taking about--traffic out here SUCKS.:cussing:
Will keep you updated. Good luck.
|