Xoutpost.com - Still Working on Rear Fogs...

Xoutpost.com (https://xoutpost.com/forums.php)

- X5 (E70) Forum (https://xoutpost.com/bmw-sav-forums/x5-e70-forum/)

- - Still Working on Rear Fogs... (https://xoutpost.com/bmw-sav-forums/x5-e70-forum/84346-still-working-rear-fogs.html)

Ordered the switch from ebay and the wire from ECS tuning. The entite job took me about 45 minutes and it worked perfectly. The hardest part was trying to snake the wire down from the switch to the FRM module. The Instructions posted here were perfect if anyone is thinking of doing it. Merrt Christmas.

Quote:

Originally Posted by marshotel (Post 913380)

Do you have a link to the switch on epray and a cat# from ECS?

Thanks

See the link below for the switch. The rest of the info you need is in the DIY PDF that is posted earlier in the thread (2nd post).

BMW E60 E61 E70 x5 E71 x6 Euro Light Control Switch for Rear Foglamps | eBay

Thanks. Didn't see the cat# for the wire in the DIY, but I'll look again.

I just picked up this switch

Headlight Light Control Module 913472702 LCM LKM for BMW E70 X5 | eBay

I needed one with controls for hud, we'll see if I can get it working over the winter :)

I need one with HUD as well. The listing that Marshotel linked to gives you instructions to list your options "Xenon, HUD,and Night Vision" when you order.

Quote:

Originally Posted by blue dragon (Post 913444)

I just picked up this switch

Headlight Light Control Module 913472702 LCM LKM for BMW E70 X5 | eBay

I needed one with controls for hud, we'll see if I can get it working over the winter :)

Are they Left Hand/Right Hand Drive specific? Probably pretty easy to take out of the trim.

^^ Got the switch, there are four screws holding the switch to the trim, so you can swap the switch into your existing trim quite easily if you get the switch from a RHD car. Going to tackle this tonight and post the results.

<edit> I now have rear fogs. Thanks to the OP for figuring this out.

Quote:

Originally Posted by 95wildtt (Post 850564)

I'm still looking into the rear fog light option for our E70.
I have the needed switch installed, and have been looking at the FRM module for the needed coding.
There is a bunch of stuff about the Brake Force, and the NSL (rear fogs) and Ive tweaked most of them without any luck as of today.
Can someone from Europe or Canada, with working Rear Fogs send me a copy of the FRM module contents?

UPDATE: NO CODING NEEDED!
Here is a DIY...

Thanks,
John

John,

I am trying to add fog lights to my 13 X5M. I already got the headlight switch assembly which has the Front fog light button. Question is which pin on the switch correspond to the fr. fog light button, is it #6?. Also on the FRM, which pin # correspond to the fr. fog light signal trigger?

I am not sure if the X5M which does not have stock fr fog light actually have wiring harness for the fr. fog lights somewhere behind the bumper (hopefully it has) but at this time I am simply trying to figure out the pin# of the fog light switch and the FRM

Thanks,

Awdnut

The first post in this thread has a DIY document that shows you the pins for the connectors at each end of the cable behind the dash.