Weirdness after CIC retrofit
 

Hi,
Completed the CIC retrofit a few weeks ago, and have been getting the reset clock message almost everytime I start the car recently... The battery is only 1.5 years old. Everything has been working fine...

For some reason, he can not read the body or engine control modules to check battery for proper registration.

My indie pulled the codes below... Any ideas?

Air conditioning control panel:
Current fault codes

9C6B: steering wheel heating
Error will not cause a warning light
Error is currently present
Test conditions have been completed
Signal or value below threshold

E723: message (KCAN: status steaming up pane V, 2D1)
Error will not cause a warning light
Error is currently present
Test conditions have been completed

Instrument cluster

A559: clamp 30g-f switch off
Error will not cause a warning light
Error is not currently present
Test conditions have been completed

Roof function control center

A670: BSS Error signal line BSS 0xA670
Error will not cause a warning light
Error is currently present
Test conditions have been completed

Central control unit (CON)

E2D6: error will not cause a warning light
Error is not currently present
Test conditions have been completed
Short circuit or signal interruption

Audio system controller

E1CD: error will not cause a warning light
Error is not currently present
Test conditions have been completed

C5AE: error will not cause a warning light
Error is currently present
Test conditions have been completed

C5BF: error will not cause a warning light
Error is currently present
Test conditions have been completed

MOST/CAN RADIO GATEWAY CD73/MD73

C5BF: error will not cause a warning light
Error is currently present
Test conditions have been completed

Tuner/digital satellite radio - USA

DE10: ring fracture diagnose was performed
Error will cause a warning light
Error is not currently present
Test conditions have been completed


PS everything was reset and came right back on.