CIC has stopped working... Dead/Transport mode
 

Hi,

Back again...
The alternator in my X5 died, and was just replaced.
After the work was done, the CIC is completely dead, no activity at all.
When reading the CIC, it reports that it is in "transport mode" with my technicican's scanner.

I haven't hooked the laptop up to look around with INPA and NCS, but curious if anyone has any ideas.
The only "coding done" was to regsiter the battery, which for some reason was reset, like it had never been set.

Thanks in advance,
John

Use INPA to take the car out of transport mode, its one of the body modules, I don't remember which one, but it didn't shut down properly when your alternator died, and thats what caused this

So it's a smiple command in INPA?
Don't have my laptop in front of me...

Thanks for all of your help!
John

So this seemed to clear the transport issue with the CIC, but now I have a bunch of other weirdness... Rear climate, audio amp, seats, etc and a number of warning lights on the dash.

Any ideas?

Kinda panicing here...