As suggested above,i would start by checking the ATF level.
Was the fluid flushed recently?If so,was the filter replaced?
On my X it all started with 2nd to 3rd slipping,but sometimes it wouldn't move even in 1st but that slam into gear really bad.
Within 1000kms from a partial flush(just a half fluid volume) I ended up with the Torque Converter shuddering at 40-45 km/h.So,if you start some slight shaking at low speeds,then you have to get ready for a rebuild.
Another thing that throws failsafe modes is a bad battery,or alternator.
But it has no certain pattern,I've been there too,so if your box is behaving the same way under certain conditions,then it's a mechanical fault.Unfortunately.At least I would think so.
Quote:
Originally Posted by SANSABA1
hi all, i have problem when i start a car after 2rd gear to 3rd gear, when the car is cold safe mode prog come on board and move is very slow.after i turn off car and start after 10 second , there is no messege and no promblem all day long, next day morning there is same problem!! today i checked by computer and there was problem slipping 2rd gear to 3 gear, can anybody tell what i do, some say me there is problem of brain some say abot transsmission problem but why its comes when the car is cold???
|