View Single Post
  #15  
Old 02-12-2015, 04:25 PM
StephenVA StephenVA is offline
Member
 
Join Date: Jun 2013
Location: Virigina, USA
Posts: 2,574
StephenVA is on a distinguished road
Quote:
Originally Posted by tcoop View Post
I have the 4.4 V8.

Thanks guys I appreciate all your help. I would have never known that it was missing if not for this forum.
31106761790 REINFORCEMENT PLATE 6.70# $183.40
31101096987 HEX BOLT WITH WASHER - M10X55 6-QTY $4.79
33306760587 HEX NUT WITH FLANGE - M10-10 ZNS3 6-QTY $1.46

Note: These bolts are TORQUE to Yield bolts. Which means you torque them down to spec, then crank them another 90 degrees. When you look at these $29 worth of bolts and nuts you will see they are not normal. The nuts have a oval opening that crushes when torqued correctly. They are a ONE TIME use bolt.

Can you use a grade 8 bolts from some other source? Sure. What will be the long term out come? Who knows. That is what engineering is for. If you choose to go down the cheap/alternative path, then you as the consumer accept the out comes. Only a knuckle headed PO or low information tech would leave off the plate and mounting bolts as they hold the sway bar mounting points to the sub frame. Not a good plan. Somewhere there is a plate and a set of biggie bolts laying in a shop. Did the vehicle in question come with any maintenance history? Good starting point in looking for the free/original plate.

There is one listed on Ebay for $80 with the right holes and part number (correct image too!)
__________________

2005 X5 4.8IS
The Blue ones are always FASTER....

Current Garage:
2005 X5 4.8is
2002 M5 TiSilver
2003 525iT
1998 528i
Former Garage Stable Highlights
2004 325XiT Sport
1973 De Tomaso Pantera, L Model
1970 Dodge Challenger T/A 4 sp Alpine White
1970 Dodge Challenger T/A 4 sp GoManGo Green
1971 Dart Sport, “Dart Light” package
1969 Road Runner 383
1968 Ply Barracuda 340S FB Sea-foam Green

Last edited by StephenVA; 02-12-2015 at 04:50 PM.
Reply With Quote

Sponsored Links