|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#15
|
|||
|
|||
|
Quote:
31101096987 HEX BOLT WITH WASHER - M10X55 6-QTY $4.79 33306760587 HEX NUT WITH FLANGE - M10-10 ZNS3 6-QTY $1.46 Note: These bolts are TORQUE to Yield bolts. Which means you torque them down to spec, then crank them another 90 degrees. When you look at these $29 worth of bolts and nuts you will see they are not normal. The nuts have a oval opening that crushes when torqued correctly. They are a ONE TIME use bolt. Can you use a grade 8 bolts from some other source? Sure. What will be the long term out come? Who knows. That is what engineering is for. If you choose to go down the cheap/alternative path, then you as the consumer accept the out comes. Only a knuckle headed PO or low information tech would leave off the plate and mounting bolts as they hold the sway bar mounting points to the sub frame. Not a good plan. Somewhere there is a plate and a set of biggie bolts laying in a shop. Did the vehicle in question come with any maintenance history? Good starting point in looking for the free/original plate. There is one listed on Ebay for $80 with the right holes and part number (correct image too!)
__________________
2005 X5 4.8IS The Blue ones are always FASTER.... Current Garage: 2005 X5 4.8is 2002 M5 TiSilver 2003 525iT 1998 528i Former Garage Stable Highlights 2004 325XiT Sport 1973 De Tomaso Pantera, L Model 1970 Dodge Challenger T/A 4 sp Alpine White 1970 Dodge Challenger T/A 4 sp GoManGo Green 1971 Dart Sport, “Dart Light” package 1969 Road Runner 383 1968 Ply Barracuda 340S FB Sea-foam Green Last edited by StephenVA; 02-12-2015 at 04:50 PM. |
| Bookmarks |
|
|
|
|