I just finished the process that was posted by bob01. And I have text + menu now. Works like a dream
Heres what he wrote. I think it's instruction from TomG as well. Hope this will help you out pesto. Just a note to on top of this, when you controling the menu on iPod, you do it via controls on NAV, NOT via forward/previous buttons on iPod. I confused myself with the [>] or [<] on NAV with iPods forward and previous buttons!
And firmware 2B2, may be essential. You can check the firmware version when the warning screen comes up on iPod(Top right). Mine said V22.B2, I'm assuming this is the latest version 2B2.
Below is what bob01(Rob) wrote:
Quote:
Here're some pointers based on my own experience...
1. First, make sure you're running the 2B2 firmware from Tom G.
2. Press and release [disc-6], don't hold it down
3. Look at the iPod's screen - you should see the Dension logo.
- On hitting [disc-6] a menu should appear, scroll through the menu with [<] and [>] or the NAV wheel, select by pressing and holding the [>]
- Select "Setup"
- Select "Text Selector" - the MID should now read "Select 1" and the NAV should say "Select 3" <- * I think - going from memory here...*
- press [disc-1] for iPod text on the MID, [disk-3] for the NAV
- done.
Cheers,
- Rob
|
Am I suppose to have contol on iPod itself? And, somehow after doing finishing with instructions, "TELEPHONE" button appeared on my NAV screen...but I haven't got bluetooth phone. How can I get rid off it? Or maybe god is giving a hint...
