|
probably not going to be a big help - I never saw it, only by sticking the photo down and randomly taking photos did I get this image.
I was working under the intake manifold at the cabin side of the engine. This component was to the left and a little lower than where the dual temp sensor is bolted into the block. I was able to pull off that frayed tube in the photo, it was about 2 inches long I thought I would just replace it with a piece of tubing but like I said it had some sort of metal restrictor in the center, then from there it was connected to the tube that runs between the heater hoses by way of plastic tubing connector.
TAHNKS!
__________________
2004, X5, 3.0, 202k+
|