View Single Post
  #1  
Old 10-20-2017, 03:13 PM
bcredliner's Avatar
bcredliner bcredliner is offline
Member
 
Join Date: Jun 2008
Location: Little Elm,Texas. (40 minutes North of Dallas)
Posts: 8,108
bcredliner is on a distinguished road
Quote:
Originally Posted by mcfee03 View Post
  1. Was running OK-ish after the DISA and CCV replacement, but the battery was not charging, indicating a dead alternator.
  2. BMW airbag check (see detail below)
  3. Replaced alternator, jump started car with OLD battery. Engine drove weak/lights were dimming on/off but NO failsafe error came up...
  4. When replacing Alternator, broke the Auxilary Water Pump, bought a replacement
  5. Replaced battery, car starts every time but immediately goes to Trans Failsafe

Could it be rejecting the new Auxilary water pump? Do I need to register new parts to the ECU?


*MAY be unrelated* But... I took it to BMW Sydney for the airbag recall check. Drove fine there. When they gave it back to me, it was incredibly weak. I took it back immediately. They used some "powerpack" to jump start it immediately. I would normally leave it on jumper cables for 30 mins then start.



I have not cleaned it with MAF cleaner- but is dust likely to cause this? It is also a bit broken... http://imgur.com/9p3iSPF
No need to let ECU know you have changed aux water pump.

The MAF may or may not be the problem but I would replace it with an OEM part because it is broken. I wouldn't even bother cleaning it. I wouldn't ever take the chance anything could be sucked into the engine.
__________________
X5 4.6 2002 Black Sap, Black interior. 2013 X5M Melbourne Red, Bamboo interior
Dallas
Reply With Quote

Sponsored Links