Crowz, Need your help, I bought this same system. I read your write up on your site. Problem is it still didn't work. The additional wire you connect to wasnt clear.
i can get power but no sound. from your site below
quote
"Next I had to “fix” a problem my install had. The system would not power on the amplifier. There was no power coming from the seicane head unit on the wire that should turn on the amp. So I ran a wire from the seican head unit to the hatch area and spliced it into the plug they provided (What Plug?). This powered the white wire in the factory harness to turn the amp on when the radio came on. I will post pics of this tomorrow. Its raining right now and I don’t want to get soaked taking pics tonight."

"The wire I mentioned that you run from the head unit to back to solve the amp not powering on is hooked to #5 on the seicane head unit. Its blue with a white stripe I think. I know its blue just not sure on the white stripe part.

Then the other end of the wire hooks to the “auto ant” wire in the hatch area. It is blue with a white stripe for sure. This will fix the amp problem."

Clarification needed. wire hooked to the #5 on the head unit but the picture shows the plug that goes back in the trunk. So at this point no idea what to hook what to.
this all was several days ago. So i registered to ask this question (had to wait 6 days) since then i went back and fourth with Seicane in china and they are next to useless.
Now, i bought some amps and speakers for a full blow tear out and thought i could use this head unit. Problem i have now is there is no voltage on any of the out put pig tails.

Any thoughts on any of this?:

Chris
SW Mo