Quote:
Originally Posted by Overboost
Before I decided to run my rear camera power from my AVIN headunit, I had planned on grabbing power from the rear fuse panel. If you want KL 15 power you can tap into the rear defroster relay pin 4/ 7.5A fused F34 or if you want KL R 12V you can tap into the unloader relay pin 8/ 5A fused F7.
|
KL is the abbreviation for 'klemme' which is the German term for connector / connection.
KL15 is ignition switch position #2 (on)
KL30 is battery positive, hot at all times
KL31 is battery negative, connected all the time
KL50 is ignition position #3 (start)
KLR means ignition switch position #1 (accessory)
Is the above correct?
