Hey overboost, thanks for the reply. Yes I unchecked the warm and cold function on the fog light bulb. Hence why I didn’t get any error messages, but this was just a test to see if my coding was actually working successfully.

The main issue is the signal lights. I was able to code the “cold” function off but not the “warm” function as that box is greyed out for me. The weird thing was when I hovered over the front signal light check box it gave me a weird description that reads “Lng. Text 1310.2 not found”. But hovering over any other check box and it would give a proper description, not sure if this is an important detail.
Currently, every thing in the LCM is unchecked and it the hyper flash still exists.

So at a total loss as to why the bulb monitoring keeps working even after I’ve disabled everything. And the worst of it all is, when I start the vehicle fresh, the indicator blinks normally for like 2 blinks and then starts hyperflashing again, which clearly means that the bulb monitoring is still working.