|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
NavCoder iBus - Help Needed
I have an 04 Range Rover, basically a 2004 BMW X5 4.4 with a Land Rover skin. I installed LEDs in my turn signals (front + back) and now they’re hyperflashing. I bought the NavCoder license to turn off the “hot and cold bulb check” monitoring function. I successfully uncheck marked all the hot and cold monitoring but my hyper flashing still exists. I removed a fog light bulb to see if the LCM even got coded, and I got no warning lights so the LCM did indeed get coded, but just the signal lights didn’t? Any ideas on what I am doing wrong? Any and all help is appreciated, thank you. |
Sponsored Links | |
|
#2
|
||||
|
||||
Quote:
__________________
Digital Competition Systems The older I get... The faster I was... No Fear |
#3
|
|||
|
|||
Quote:
The main issue is the signal lights. I was able to code the “cold” function off but not the “warm” function as that box is greyed out for me. The weird thing was when I hovered over the front signal light check box it gave me a weird description that reads “Lng. Text 1310.2 not found”. But hovering over any other check box and it would give a proper description, not sure if this is an important detail. Currently, every thing in the LCM is unchecked and it the hyper flash still exists. So at a total loss as to why the bulb monitoring keeps working even after I’ve disabled everything. And the worst of it all is, when I start the vehicle fresh, the indicator blinks normally for like 2 blinks and then starts hyperflashing again, which clearly means that the bulb monitoring is still working. |
#4
|
|||
|
|||
Is it possible to use PA Soft 1.4 through the USB iBus interface? Or do I have to go through the OBD port?
|
#5
|
||||
|
||||
Honestly I have never used Navcoder so I can't tell you if it works or not.
I can tell you that PA Soft 1.4 works so I would suggest investing the $15 and giving it a try.
__________________
Digital Competition Systems The older I get... The faster I was... No Fear |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|