Quote:
|
Originally Posted by Ed Garces
My locked Cingular Treo with the latest updates (1.17) pairs flawlessly (within 3 seconds) with my 2005 X5. However, two days ago, just came back from a 10 day trip in the Philippines (where I used the Treo a few times on a different network) and all of a sudden my Treo beeps and gives me a message that it's trying to connect (with the X5 BT) This would go on and off and each time failing to complete the pairing.
Here's how I fixed mine - on your Treo, remove the X5 in your Trusted Device list. Make sure your Treo is "discoverable" Start your X5, press the the "Tel" (might be different if you have Nav. system, I don't). When the "Activate Phone" comes up, press "Set up Devices" in your Treo and follow the prompts from there.
I remember having this same problem once previously when I came back from a trip in Canada and again used the Treo on a non-Cingular network.
Basically I think to correct the problem, you need to pair the Treo 650 again as a new device. Hope this works.
(Also try a soft reset in your Treo, this might just fix the problem. Just noticed that you have a brand-new Treo and pairing for the first time.)
|
There are no trusted devices. The X shows up in the "all known devices page. I believe you need pass key acceptance before you can be installed as a trusted device. I believe the issue may be the X. Earlier I mentioned that if you go to the telephone screen I get the words "please wait" Wait for what? After 2 hours whatever i'm suppose to be waiting for hasn't happend.
__________________
"What you hear in a great jazz band is the sound of democracy. “The jazz band works best when participation is shaped by intelligent communication.”
Harmony happens whenever different parts get to form a whole by means of congruity, concord, symetry, consistency, conformity, correspondence, agreement, accord, unity, consonance…….
|