Update after replacing the AUC sensor and clear code for the day
Initially had this showing up on a BimmerGeeks ProTools Scan
Vin: 4USFE435X7LY79830
Chassis: E70
Model: X5 3.0si
Engine: N52
Body Style: off-road vehicle
++++++++++++++++++++++++++++++++++++++++++++
FRM [FRM_70] | 9CC5: Mirror heating, driver's side, faulty
JBBF [JBBF70] | A6CF: AUC sensor <<<<---- Ordered new one
JBBF [JBBF70] | 9C69: Rear-cabin stratification adjuster
KLIMA [IHKA70] | 2007 x5 9C4A: Dynamic-pressure-flap motor
KLIMA [IHKA70] | E729: No message (automatic air recirculation control sensor, 0x2D0), receiver integrated automatic heating / air conditioning system, transmitter JBE <<<---- Related to AUC Sensor?
KLIMA [IHKA70] | E728: No message (rear stratification, 0x2D3), receiver integrated automatic heating / air conditioning system, transmitter JBE <<<---- Related to AUC Sensor?
Replaced the AUC sensor, cleared codes and so far so good.
Only codes left that I need to fix
FRM [FRM_70] | 9CC5: Mirror heating, driver's side, faulty <<<<---- This morror was replaced this summer by a body shop, need to confirm everything is connected and fuse is good
KLIMA [IHKA70] | 2007 x5 9C4A: Dynamic-pressure-flap motor
Figured out that you can use ProTool to test all the Flaps oprmomg and closing. All responde except The Dynamic Pressure Flag when testing
Is this the correct part ?? If so should be able to access it under the passenger side footwell?
https://www.fcpeuro.com/products/bmw...eo-64119321034