9C4A – stepper motor dynamic pressure

[HellRazor35]

Update after replacing the AUC sensor and clear code for the day

Initially had this showing up on a BimmerGeeks ProTools Scan

Vin: 4USFE435X7LY79830
Chassis: E70
Model: X5 3.0si
Engine: N52
Body Style: off-road vehicle
++++++++++++++++++++++++++++++++++++++++++++
FRM [FRM_70] | 9CC5: Mirror heating, driver's side, faulty
JBBF [JBBF70] | A6CF: AUC sensor <<<<---- Ordered new one

JBBF [JBBF70] | 9C69: Rear-cabin stratification adjuster

KLIMA [IHKA70] | 2007 x5 9C4A: Dynamic-pressure-flap motor

KLIMA [IHKA70] | E729: No message (automatic air recirculation control sensor, 0x2D0), receiver integrated automatic heating / air conditioning system, transmitter JBE <<<---- Related to AUC Sensor?

KLIMA [IHKA70] | E728: No message (rear stratification, 0x2D3), receiver integrated automatic heating / air conditioning system, transmitter JBE <<<---- Related to AUC Sensor?


Replaced the AUC sensor, cleared codes and so far so good.

Only codes left that I need to fix

FRM [FRM_70] | 9CC5: Mirror heating, driver's side, faulty <<<<---- This morror was replaced this summer by a body shop, need to confirm everything is connected and fuse is good


KLIMA [IHKA70] | 2007 x5 9C4A: Dynamic-pressure-flap motor

Figured out that you can use ProTool to test all the Flaps oprmomg and closing. All responde except The Dynamic Pressure Flag when testing

Is this the correct part ?? If so should be able to access it under the passenger side footwell?

https://www.fcpeuro.com/products/bmw...eo-64119321034