Today while driving with everything working perfect I come off a roundabout at around second gear speed when suddenly the X slips into 5th gear with subsequent massive slippage of gear. No lights/warnings. Pretty level ground so decide I can get home. About 1 mile later trans failsafe warning comes on. I get home and find reverse is good/normal engages fine no slip, select drive and straight to 5th. Battery is good no recent flat battery problems getting between 13.8 to 14v on gauge. Check codes.


This is the result. Can anyone pick fault with those solenoid readings or advise on where to start looking for the interrupted signal.
Readings were taken after clearing codes and moving backwards 10 feet and then forward.
Much appreciate anyone reading and look forward to your comments.


Sent from my iPad using Xoutpost.com