Quote:
Originally Posted by X5chemist
Nice! Good to know spares can be swapped in. |
From what I have learned, if you get the correct part number module, and try to get reasonable close build date, it should work. These modules I bought
were 20 to 30 dollars shipped. Real OEM will tell you the part number you need for your particular X5. You MUST have a scanner tool that can clear airbag codes.
I have heard that a “blown” airbag module might not work when needed.
This is because the module has already blown the airbag. It thinks the job is done and supposed will not re fire. I have not proven that.
I also used a You Tube University video to access the module.
The center console has side panels that remove. You will access the module from the sides and not from the top down There s a metal plate that is overhead of the module. The video said to bend it, I removed mine. I did have to use wood wedge to push up the blower fan and gain access. It’s a doable method. It is very tight in there and you will need small 1/4 drive ratchets and small hands.