Tom,


On my 06 X3 I didn't see another 6 pin connector. I was using the one marked CDSAR. I'll look for another one tonight. (Found it)

I removed the radio and connected the CDSAR connector to the radio, but maybe if there is another connector I shouldn't have done that. I do have a coax connector on the back of the radio and there are two coax wires in the center console which are joined together. In the back by the DSP amp
there is another 2 coax connectors with the satelite wiring.

(Removed radio again, used multimeter to ring out cable from console to
radio, connections are good) Connected Dice to ghetto blaster, got sound,
but when connected to radio there is no sound output)

No satelite installed, but when I hooked up to the connectors in the back there was no sound as well (but this was before I switched the connectors on the radio to the CDSAR connector.

Any advice you can give me would be great.

Is there anything I need to do to get the radio to recognize the dice inputs.
It's recognizing the text ok.

Thanks

Gary