View Single Post
  #6  
Old 01-18-2008, 02:19 PM
ambishop ambishop is offline
Member
 
Join Date: Feb 2006
Location: Austin
Posts: 289
ambishop is on a distinguished road
right. Take a look at the other wiring that is located up in the overhead console. It is most likely taped down to the other wires.

In the X3 they use a little bit of hot glue to glue it to the roof.
In the X5 they use tape to tape it to the other wires- sometimes as far over as near the sun shades mounting screw
in the E39 5 series they use a small clip on the left side to clip the wires up and out of the way.
In the Convertible 3 series sometimes the wires are pushed forward towards where the wires are located for the rear view mirror (yes near the glass windsheild)

All of these efforts are done in prewired cars to keep the wires from rattling around when driving. Obviously when the wires are plugged into the mic it is a non issue but when not plugged in they try to keep them from bouncing around on the roof
Reply With Quote

Sponsored Links