Originally Posted by TwinsPoppa

Gotcha!

No, really .. just give me some time to do a half-decent write up. Pics will have to follow later.

I - Remove driver side lower dash panels

a) Remove the lower plastic panel. Remove the lower dash and steering column cover.


II - Run wires from AEs to the inside of the X

b) Open the hood. Look for a firewall grommet located near the corner of the windshield on the driver's side. Use something with a sharp point and make a small hole in the grommet. Fish the wire through. You should see the wire come through above the footrest inside.


III - Tap the Angel Eyes

IV - Tap ignition wire for power

V - Connect to switch