Is it not a smart idea to just "splice" angel eyes into fog light wires? I was going to install mine after work today, but really hesitant to start splicing wires.
Quote:
|
Originally Posted by TwinsPoppa
Gotcha!  
No, really .. just give me some time to do a half-decent write up. Pics will have to follow later.
I - Remove driver side lower dash panels
a) Remove the lower plastic panel. Remove the lower dash and steering column cover.
II - Run wires from AEs to the inside of the X
b) Open the hood. Look for a firewall grommet located near the corner of the windshield on the driver's side. Use something with a sharp point and make a small hole in the grommet. Fish the wire through. You should see the wire come through above the footrest inside.
III - Tap the Angel Eyes
IV - Tap ignition wire for power
V - Connect to switch
 |
03-20-2009, 03:04 PM
Threaded Mode
