I mentioned in another thread:
http://www.xoutpost.com/bmw-sav-foru...ht=2011+diesel
...That I would post pictures. Here they are...These are three Recaro Young Sport seats in the back of my 2011 Diesel...NOT for those lacking patience or those who are in a hurry.
Started with the middle seat and secured it using the rear anchor points and the X5 seat-belts; I then moved on to the outer seats.
Sounds simple, right?
Many explicatives were mumbled in the course of figuring out 'how' to do it. I wanted to use the latch system, but it is impossible. The X5's latch anchors are recessed into the seats; the Young Start is a sizeably-large seat and its latch anchor harness isn't quite long enough...And if it were, the latch anchors would be under/between the rear section where the seat sits and probably not the best way to secure the car seat.
Note: You cannot fit a sheet of paper between the seats.
Note: The doors close fine without hitting the (otherwise) wide seats.
Note: Plan on not removing them or accessing the 3rd row seat if you have them...Putting them in and out is not fun and takes time so as to do it right.