Quote:
Originally Posted by love2speed
just have 3 questions.
1. Is the relay part of the module (ie one unit)...yep
2. If not can I just replace the bad relay in the module?..bench skills soldering needed
3. Where is the module or relay located?...see pdf
|
Hi before you remove the glovebox and repair/replace the GM you should make some electrical tests with your multi meter.
1 Test dc volts at window motor connector while operating up switch should be approx.+12V.
2 Test dc volts at window motor connector while operating down switch should be approx.-12V.
The correct result is the voltage stays the same but the polarity changes from + to -
3 Next remove motor wires and connect 12v from battery etc to motor directly and observe that window moves up and down as you reverse the wires on the battery[this will prove that there is no mechanical problem ]
hope this helps