01-09-2006, 11:05 AM
|
Administrator
|
|
Join Date: Mar 2005
Location: X5world
Posts: 54
|
|
Throttle Adaptation Procedure - M54 MS43 EDK
Contributed by: X5world
SUBJECT: M54 EDK Throttle Adaptation Procedure
MODEL: All with M54/MS43
SITUATION: The EDK (electronic throttle control) adaptation must be reset after a new engine control module, or a new EDK unit is installed.
PROCEDURE: The adaptation process takes approximately 20 seconds to perform. If the adaptation process is not performed, the vehicle will not start, or run in "fail-safe" mode. If the vehicle does not start, or runs in "fail-safe" mode after replacing the DME or EDK, perform the following procedure:
1. Turn ignition ON (KL15) for 10 seconds. DO NOT ATTEMPT TO CRANK / START THE ENGINE.
2. Turn the ignition OFF for 10 seconds.
3. Start the engine.
References:
http://home.comcast.net/~jns-johnson/M54-MS43_EDK_Throttle_Adaptation_Procedure.pdf
|